Products > Tackifying Resin > SL-5040Homogenizing Agent
 
 

SL-5040 Homogenizing Agent

DESCRIPTION
  • Homogenizing agents are mixture of aliphatic, naphthenic and aromatic hydrocarbon, acting as a kind of excellent dispersant and homogenizing agent for rubber industry
  •  
    CHARICTERISTICS

    Property

    Specification

    Test Method

    Appearance

    Black pastilles

    visual

    Softening Point,

    96 -106

    WI-QC-102

    Ashes content, 800, %

    2.0

    WI-QC-103

    Specific gravity

    1.04-1.08

    WI-QC-108

     
    TYPICAL PROPERTIES
  • SL-5040 homogenizing agents are mixture of aliphatic, naphthenic and aromatic hydrocarbon, They improve the homogeneity of elastomers of different polarity and viscosity. They are rapidly absorbed by the polymers during the mixing cycle. A relativiely low viscosity mass is quickly achieved into which other compounding ingredients can easily be incorporated.
  • SL-5040 homogenizing agents increase the green tack of many compounds.
  • In innerliner compounding, SL-5040 can reduce the gas permeability due to its good property of dispersing powder additives.SL-5040 homogenizing agents assist further processing. They improving the extrusion, calendaring properties, ensuring a smooth surface and little die swell. SL-5040 do not harden during vulcanization. The hardness of vulcanizate is not reduced as much as when using, for example, mineral oil plasticizer. SL-5040 homogenizing agents are typically applied in innerliner, bead chafer or tread compound.
  •  

    APPLICATION

  • SL-5040 should be added at the start of mixing. SL-5040 can be used in all types of rubber
  •  

    PACKAGING

  • 25kg( net weight), Kraft bag inner PE coated or PE bag.
  •  

    STORAGE

  • This material can be stable for 24 months under a dry and cool condition
  •  
    OCCUPATIONAL SAFETY AND HEALTH INFORMATION
  • Refer to Material Safety Data Sheets prior to using this material.
  •